For collecting and transferring welding data to ArcInfo. The device connects easily to Kemppi FastMig welders and a laptop.
Euro Adapter for MinarcMig and MinarcMig Evo takes your connectivity to a whole new level.
GH 10 Gun holder increases the usability around the workshop. The gun holder can be mounted on a welding machine, transport unit, or welding table.
GH 20 Gun holder increases the usability around the workshop. The gun holder can be mounted on a welding machine, transport unit, or welding table.
GH 30 Gun holder increases the usability around the workshop. The gun holder can be mounted on a welding machine, transport unit, or welding table.
Suitable for use with Kemppi MasterTig MLS, Master MLS, and Master S welding equipment.
Increase welding quality, work efficiency, comfort, and safety with appropriate, easy-to-use Kemppi remote controls.
KV 401 Swing boom arm is an ideal for controlled reach around the workshop.
This unit is suitable for MXF 65,67, MXP 37 PIPE, MXP 38, and ArcFeed.
The MXF 65 hanging kit is meant for hanging the power source. This solution helps to create more versatile work spaces around the workshop. This unit is only suitable for MXF 65.
KFH 1000 is a movable option for hanging cables. This solution helps to create more versatile work spaces around the workshop.
This unit is suitable for MXF 63, 65, 67, MXP 37 PIPE, MXP 38, WFX 200, 200 P, 200 AMC WFX 300, 300 P, 300 AMC and ArcFeed.
The MXF 63 hanging frame is a metal frame for hanging up your power source. This solution helps to create more versatile work spaces around the workshop. This unit is only suitable for MXF 63.
The cabinet heater maintains a temperature level inside the wire feed cabinet for conditions where the ambient temperature cycles up and down.
The KV 200 mounting plate for two wire feeders.
This unit is suitable for MXF 63, 65, 67, MXP 37 PIPE, MXP 38, and ArcFeed.
Earth clamp with 200 A capacity, 25 – 35 mm jaw opening, and dia 6 mm cable shoe connection.
Choose Kemppi for safe, grounded welding.
Earth clamp with 300 A capacity, 50 – 70 mm jaw opening, and dia 6 mm cable shoe connection. There is a copper braid between the connector jaws.
Choose Kemppi for safe, grounded welding.
Earth clamp with 500 A capacity, 70 – 95 mm jaw opening and dia 8 mm cable shoe connection. There is a copper braid between the connector jaws.
Choose Kemppi for safe, grounded welding.
Earth clamp with 600 A capacity, 35 - 120 mm opening and cable connection with a hex screw. This screw-type clamp has a brass frame.
Choose Kemppi for safe, grounded welding.
Electrode holder with 300 A capacity (150 A 60 % ED/200 A 35 % ED). Cable connection with a hex screw for 16 – 25 mm² sized cables.
The KEMPPI 300 is well insulated, lightweight at 321 g, and has a copper alloy frame for high electrical conductivity.
Electrode holder with 400 A capacity (200 A 60 % ED/250 A 35 % ED). Cable connection with a hex screw for 16 – 25 mm² sized cables.
The KEMPPI 400 is well insulated, lightweight at 421 g, and has a copper alloy frame for high electrical conductivity.
Electrode holder with 500 A capacity (250 A 60 % ED/300 A 35 % ED). Cable connection with a hex screw for 35 – 50 mm² sized cables. The URANIA 5 is well-insulated, weighs 500 g, and has a copper alloy frame for high electrical conductivity.
Electrode holder with 600 A capacity (300 A 60 % ED/400 A 35 % ED). Cable connection with a hex screw for 50 – 70 mm² sized cables. The URANIA 6 is well insulated, weighs 855 g, and has a copper alloy frame for high electrical conductivity.
Electrode holder with 200 A capacity. Double-screwed cable connection for 10 – 25 mm² sized cables.
The MYKING 200 is well-insulated, lightweight at 285 g, and has a copper alloy frame for high electrical conductivity.
Electrode holder with 450 A capacity. Double-screwed cable connection for 35 – 70 mm² sized cables.
The MYKING 450 is well-insulated, weighs 485 g, and has a copper alloy frame for high electrical conductivity.
Electrode holder with 600 A capacity. Double-screwed cable connection for 50 – 70 mm² sized cables.
The MYKING 600 is well-insulated, weighs 535 g, and has a copper alloy frame for high electrical conductivity.
MXF 63 protection sliders add safety and stability to your power source. This unit is only suitable for the MXF 63.
KVF 300 protection sliders add safety and stability to your power source. This unit is suitable for the MXP 37 Pipe and WFX 300 P.
Product is intended to be used in carbon-arc gouging. It is suitable for use with the KempGouge™ ARC 800 arc gouging machine. The gouging carbon used in the electrode holder can be round or flat. The air pressure used for gouging can be adjusted by the control knob on the electrode holder.
Kemppi DataGun is a programming device that is used together with Kemppi DataStore online shop to purchase and install welding software and upgrades to your Kemppi welding machines.
In the DataStore online shop, you can purchase Kemppi welding software such as Wise and Match products, welding programs etc. and download them to your DataGun to be installed in your welding machines.
DataMaster II is a general-purpose programming, setup and calibration tool for several Kemppi welding machine models.
